Edge codes (see: “Manual AACOM++ v5 / 3. Edges configurations”) must be entered in the panel in PRO100 between signs “[” and “]”

Example: “Front door [2222]” – where the first two digits are the codes to be applied edges on the sides parallel to the fiber and the last two edges are the codes to be applied to the sides perpendicular to the fiber (see picture below)

You can define (in “grid prices”) bags accessories raw material, which will “shed” in calculation at the time of bid acceptance.

Accessories bags should be introduced in the name of PRO100 panel between signs “<” si “>”

Example: “Front door [2222] ” – where “” is an accessory bag containing: “1pc – Hinges, 1pc – hinge mounting plate, 4pcs – Holtz 3.5×16” will arrive in calculation in the time of importation.

You can add more accessories (bags) on the same panel: “Front door [2222] ” so were gathered in the calculation of the amount contained in bags accessories accessories.

Also, in AACOM ++ v5 there is an advanced automatic calculation of the necessary accessories depending on the size of the panels (see video below).

Function “Add/Substract” allows adding / decrease of constant dimensions of the panel size.

Code is “{L / W}” where L is constant for Add/Substract applied to the length and W is constant panel add / drop applied to the panel width (! Length side panel is parallel to grain …)

For example, if we want to add / subtract 3 mm from both sides of the panel name would look like this: “Front door [2222] {- 3 / -3}” so any size would have the panel in PRO100, he will get in processing / PANELS “in AACOM ++ smallest 3 mm on each side.

Another example would be making a doubled panel: as you know clad tops require extra few millimeters when cutting so after “coupling” the two panels we can to “straighten” leaf edges result.

Course can also be positive constants “Panel {5/5}” – in this case will add 5mm in size panel, or may be positive on one side and negative on the other “Panel {-7/5}”.